Engine Coolant Temp Alert

Overview of Engine Coolant Temp Alert Feature

The Deluxe Gauge Software Reflash allows you to configure a temperature at which the gauge will begin to flash the temp and oil lights, along with override the current Display Configuration and show the Engine Coolant Temperature. This allows you to dive into some loose snow or put down ice scratchers well before it is too late.

The following video demonstrates the Engine Coolant Temp Alert feature:

How to use the Engine Coolant Temp Alert Feature

When the engine coolant temperature exceeds the threshold:

The oil and temp lights will begin to flash. In addition, the LCD will display indicate that it is displaying engine coolant temperature at the top of the LCD, and flash the current engine coolant temperature in the center of the gauge. When the engine coolant temperature falls below the engine coolant alert temp, the gauge will stop flashing the oil and temp lights, and revert to the current display configuration of the LCD. Note that the menu system of the gauge will override the engine coolant temp display on the LCD. This allows the engine coolant temperature threshold to be changed after the threshold has been reached if necessary.

How to change the Engine Coolant Temp Alert:

To change the temperature at which the engine coolant temp alert is activated do the following:

  1. Press the set button to enter the menu system

  2. Press the down or up button repeatedly until EnTp is displayed at the top of the LCD, and Alrt is displayed in the center of the LCD

  3. Press the set button to begin changing the Engine Coolant Temp Alert threshold

  4. The Engine Coolant Temperature Alert threshold will be shown and start flashing

  5. Use the up and down buttons to increase or decrease the temperature at which the alert is shown. Hold the up or down buttons down will raise or lower the temperature threshold faster

  6. Once the desired temperature threshold is displayed, press the set button to save the settings